craigslist | tools in district of columbia

van lock and hasp (washington) $52

2008-07-18T14:39:03-04:00

American Van Door Lock and Hasp - White #2000/800W. Complete set includes 1 hasp, and 1 #2000 American Lock, and all mounting hardware needed to attach to your van door. Will not fit sliding side doors. When two locks are ordered they are keyed alike.
Call Industrial Ladder 630-530-7580
http://www.industrialladder.com/

Bostitch Flooring Staples (Takoma) $13

2008-07-18T10:47:06-04:00

I'm selling the remaining lot of flooring staples used in a recent remodeling project. The qty is about 2500 staples. the size is 15.5 gauge; 1/2" crown; 2" length. the manufacturer is Bostitch. I'm asking $13.

floor buffer (oxon hill md) $275

2008-07-18T10:43:46-04:00

i have a clarke floor buffer going for 275 obo with a couple of accesories call me 2404414052

John Deere Lawn Tractor LX - 176 (Washington DC) $275

2008-07-17T18:01:51-04:00

Good running John Deere LX 176 lawn tractor with a 38 inch deck, 14 horse power Kawasaki air cooled engine, hydromatic transmission, 2 wheel drive. Runs, drives and cuts, take it home and put it to work.
Serial # MOL 176X047254 manufactured in 1994.

Kevin
202 783 3006
driscollke@msn.com

stainless steal metal shelves/stainless steal metal shelves/stainless (frederick) $1

2008-07-17T17:40:52-04:00

I have 4 total shelves 2 small ones are 20.00 ea
the med one for 30.00
an the large for 50.00 or all 4 for 100.00 good for garages call 301-668-1071 ask for art

Square D 3 Phase Circuit Breaker #KDL32125 Amp (Silver Spring) $800

2008-07-17T15:04:35-04:00

Square D - 3 Phase ciruit breaker w/indoor housing Part #KDL32125 A

Brand New

Please Call: 301 455 2121

Makita HM1500B 42-Pound Demolition Breaking Hammer (District Heights) $450

2008-07-17T12:16:18-04:00

KING PAWN
6108 OLD SILVER HILL ROAD
DISTRICT HEIGHTS, MD. 20747
301-735-7200

Makita HM1500B 42-Pound Demolition Breaking Hammer

THIS MAKITA IS USED. NORMAL MARKS AND SCRATCHES FROM USE.
WORKS LIKE IT IS BRAND NEW........

COME ON BY AND TAKE A LOOK OR GIVE US A CALL.

IF THIS IS NOT WHAT YOUR LOOKING FOR DROP BY AND SEE OUR SHOWROOM.
YOU NEED IT WE HAVE IT...........

Dewalt 24v sawzall (Hyattsville, Md) $125

2008-07-17T12:03:24-04:00

Good condition 24v Dewalt sawzall with one battery, charger and case.
My cell is 301 335 5055.

Dewalt 24v hammer drill (Hyattsville, Md) $175

2008-07-17T11:57:13-04:00

Good condition dewalt 24v sds hammer drill. 2 batterys, charger, drill and case.
My cell is 301 335 5055.

NEW Channellock 24 Volt Cordless 1/2 in. Drill / Driver (District Of Columbia) $54

2008-07-17T10:50:20-04:00

Please respond via e*mail to get more info.

Electric Tools (Circular Saw and 110v Paint Stripper) (Sterling) $25

2008-07-17T10:24:53-04:00

(1) 110v/ 1680w Paint Stripper/ Heat Gun $25

"Milwaukee" 7-1/4" Circular Saw with (4) Carbide Blades $50

MUST SELL

Call John
703-727-9651

(2) Safety Harness' w/ decelerating lanyard (Sterling) $50

2008-07-17T10:24:31-04:00

(2) Safety Harness' with decelerating lanyard
4 point "D" ring/Full Body

$50 Each

MUST SELL

Call John
703-727-9651

Aluminum Concrete Chute 12' (Sterling) $100

2008-07-17T10:24:09-04:00

Aluminum Concrete Chute
12' with Flared End and Chain

$100

MUST SELL

Call John
703-727-9651

MORTAR MIXER USED SLIGHTLY 655PM (STERLING) $1500

2008-07-17T10:09:15-04:00

"Stone" Mortar Mixer-655PM
6CF, 8HP Honda, New Paddles
Used Slightly, No Dents!

MUST SELL!!!!

Call John
703-727-9651

CONCRETE WALL FORMING SYSTEMS (STERLING) $150

2008-07-17T10:08:52-04:00

"Gates" System
50 "Gates" Cam-Locks
(500) Wall Ties (8" 10" 12")
All for $150

"Meadows/Burke" Concrete Wall Forming System
(450) Wedges (Hairpins)
(750) 5kpsi "snap ties" for forming walls (8" 10" 12" 20" 24")
All for $250

MUST SELL

Call John
703-727-9651

CUTTING TORCHES "HARRIS" (STERLING) $125

2008-07-17T10:08:29-04:00

"Harris" Cutting Torches (#62- 3x18") with gauges(#29-100-15)
25' Leads
25' Additional Leads

$125

Must Sell!

Call John
703-727-9651

Concrete Hand Tools (Sterling) $35

2008-07-17T09:53:17-04:00

Concrete Hand Tools

(10) Concrete Floats/ Trowels/ Joiners
"Marshalltown" All 10 for $100 Total

Concrete 36" "Bull Float" w/ (4) 5' Threaded Handles All for $75

(5) Concrete Finishing Brooms (2)24" (3)36" All 5 for $35

Or Everything Together $150 Total

Must Sell
Call John
703-727-9651

DIAMOND SAW BLADES (STERLING) $50

2008-07-17T09:52:54-04:00

(1)Diamond Chain Saw Blade $50
(2) Diamond Saw Blades 24" $75 each
(2) Diamond Saw Blades 30" $150 each

SLIGHTLY USED- GREAT DEAL!

MUST SELL!

Call John
703-727-9651

GENERATOR 5000w 110/220v "GENERAC" (STERLING) $250

2008-07-17T09:52:29-04:00

"Generac" Power Plus
10HP 5 Gallon Locking outlets
5000w 110/220v

LOW HOURS

$250

CALL JOHN
703-727-9651

4 in 1 Auto Emergency Tool (commerce park) $13

2008-07-17T09:05:17-04:00

With 4 emergency functions in one, this car emergency tool is the most versatile on the market. The Super bright flashlight can be used at night in any situation. The blinking emergency light activates automatically upon removal from its base. For more information please Email Me or follow this link: http://www.tidemax.com/emergencytool.htm

Matco Tool Box $4000 OBO (Manassas, Northern VA) $1

2008-07-17T07:54:41-04:00

Matco Tool Box $4000 OBO

I bought this box used a few years ago when I was a line tech for $5000 and it's pretty much in the same condition as when I got it. I've since moved on to a different job within the dealership that doesn't require this giant box. I'm keeping the tools (NEVER sell your tools), but I've decided to sell the box, so help me get rid of this thing!

The bottom box is a Matco WorkMaster Rollaway. It has 13 deep drawers of varying size, with one really wide one that I liked to keep my deep sockets, pry bars and such in. The top box is a Matco WorkMaster II Station. It has 10 drawers and a large, divided storage area under the flip-up top (the handle, BTW, makes the flip-up top really easy to deal with). The whole thing locks and I have two keys for it. Both boxes have one really tall drawer that can store stuff just slightly taller than a generic coolant bottle. There are two locking casters and the writing tray can be flipped to either side and can be laid flat against the box.

Dimensions: I DIDN'T MEASURE! Just by eyeballing it, I'd say 5'3" tall, 4' wide and about 2'6"-3' deep.

Local pickup and cash only. Let me know if you're interested and we can set up a time for us to meet up so you can check it out in person. I'm hoping to get $4000 for this box, but if it's worth less to you, shoot me an offer. I don't know what the market's like right now, so you might be able to get an even better deal on this depending on the response I get. I'd clean it up, but I'm just short on time. It needs a serious once-over. I'd like to move this thing soon.

If I find a buyer for just the top, I'd be willing to sell the bottom separately. I'll send you pictures if you're interested.

Contact Danny at 703-789-3521 any time. Thanks and good luck

Hilti DS HS64-14" Concrete Cut Off Saw w/2 14" Blades (Washington DC) $450

2008-07-16T23:18:04-04:00

Kept indoors. Never used. Don't need, it was an impulse purchase. My wife said I should have never bought it, now I'm taking a ($500) loss. It was purchased for $1000. Oh well, hopefully someone can get good use out of it.

Dewalt 3750 PSI Pressure Washer w/Dewalt Turbo Nozzle (Washington DC) $675

2008-07-16T22:56:26-04:00

USED 1 TIME, DON'T NEED IT. 5 GALLON GAS CAN INLCUDED TOO! KEPT INDOORS AT ALL TIMES, JUST LIKE NEW!

Features:

Honda GX390 13 Gross HP** OHV engine provides reliable commercial grade quality;

3750 PSI Max* and 4.0 GPM Max* tackles the toughest of cleaning jobs;

General TX series commercial pump provides long life reliability;

DEWALT� heavy-duty spray gun with rotating side handle makes pressure washing more comfortable;

Easy start valve in the pump provides effort free starting;

75' non-marking steel braided hose is extremely durable and covers most job sites without having to move your pressure washer;

12" wheels allow you to move across tough terrain easily;

Quick connect fittings allow you to start and finish your job faster;

Heavy-duty industrial grade frame is tough enough for all terrain and job site conditions;

Included extension wand allows expanded reach for cleaning hard to reach areas

Refrigeration /Air Conditioning Testing Tool (Baltimore) $80

2008-07-16T21:18:38-04:00

This is a TIF Instruments INC. Model 8000 Hermetic Compressor Analyzer. It is used in the troubleshooting and repair of air conditioning and refrigeration compressors & equipment. Easy to use. Will save you a lot of time and guesswork in troubleshooting the problem. Tester comes with main clamp on unit, remote plug in clamp on unit, probes and carrying case. Owners manual included. In very good condition.

Will take $80.00 for everything. This is a very good cheap price compared to what it costs from the dealer. Local pickup only. No shipping.

table saw - delta model #36-600 (capitol hill) $175

2008-07-16T21:06:13-04:00

in great condition. with mobile base. pick up only.

Electrical Connector Pin Crimping Tools (Baltimore) $20

2008-07-16T21:05:59-04:00

Two used pin crimping tools for crimping AMP & DEUTSCHE connector pins to wiring. Both tools are AMP crimpers. Model #90302-1 and #90202-2. They also work on most standard computer type Parallel/serial connectors. Price is $20.00 each or get both of them for $35.00. These are expensive if you have to buy them from AMP. Email if interested.

Craftsman Electric Motor (Fairfax, VA) $50

2008-07-16T11:29:50-04:00

Craftsman � horsepower motor � see picture. $50 OBO. Local pickup only.

Power Tools (Capitol Hill) $175

2008-07-16T09:37:02-04:00

I am selling 2 items:
A Delta Shopmaster Mitre Saw. It is about a year old, in perfect condition. It has had very light use-$75. A Rigid Finishing Nail Gun. Perfect condition, comes complete with case, manual, safety glasses, extra nails. Works with any standard air compressor. Barely used-$100

Metric Wrench Set 8 mm to 24mm Comb. 14 PCS. SET "New" (Laurel Md.) $22

2008-07-15T22:11:09-04:00

New in the box and never used with pouch wrap included. BIG SET of Chrome plated 14 Piece Set, open end and box end. Great for work or the home Mechcanic. Meets or exceedes ANSI standards. Proffesional polished. I have used a set for 10 Years and still going strong. May be double wrenched and used on hydraulics. This means there tuff!!!!!!! Cash only, Thank You

Wood Truck platform (washington) $191

2008-07-15T15:19:50-04:00

* 24" x 48" Platform truck with rubber casters
* The wood deck platform truck is the most widely used truck in the industry. they are easy to operate built to last and economical. These have a capacity of 2000lbs. Decks are 7/8" thick and have a sanded hardwood with a natural varnish finish. Casters are supplied with each truck. Handles are removable with and are made from 1" steel tubing.
Item: 61099-R

call industrial ladder 301-490-0281
http://www.industrialladder.com/

NEW Zircon Stud & Joist Finder (WDC 20002) $15

2008-07-15T15:18:54-04:00

Never been used stud and joist finder. Yours for $15. Home Depot sells it for $20. Will transport it to Farragut North or West for day time pick-up. picture available

12 gauge - 3 conductor - Armored Power Cable (Reston) $200

2008-07-15T14:57:41-04:00

250 foot spool, of 12 gauge solid copper, 3 conductors (red, black and white)amored cable. Asking $200.00

RIGID 10" Compound / Mitre saw (Wheaton, MD) $55

2008-07-15T14:00:22-04:00

Well maintained. Upgraded my tools. Can be reached at (301) 466-4225 Richard.

RIGID 12" Compound / Mitre Saw (Wheaton, MD) $65

2008-07-15T13:58:15-04:00

Equiped with a metal cutter blade. Well maintained. Can be reached at (301) 466-4225 Richard.

Craftsman 12" Compound / Mitre Saw (Wheaton, MD) $65

2008-07-15T13:55:18-04:00

Well maintained. Can be reached at (301) 466-4225 Richard.

Complete Woodworking Shop (Harman,WV) $75000

2008-07-15T12:14:09-04:00

This woodshop has too many peaces of equipment to list. The lumber,cabinet hardware, drawer slides,hand tools, storage cabinets, work benche/wood vice/metal vice,and anything that pertaines to this woodshop goes. If you do not have a building large enough to put this woodshop, I can sell you a steel building that would meet your need. For more information call Jim at (304)227-4509.

PANTHER KWM-TED LANSING GUTTER MACHINE (HYATTSVILLE, MD) $6000

2008-07-15T10:07:20-04:00

One red, three-spooled Ted Lansing gutter machine for sale. Machine is in execellent condition. It is also already mounted on a 'trailer-back' carrier. There is also an unused spool of off-white aluminum coil available. Also for sale, one 40ft ladder for $350 and 30ft walkboard with scaffold pole and pump-jack for $700. All prices are negotiable.
Please call 301-864-0363, 240-533-5312 or 301-927-1188 for more details. All items must go so please call or email!

Dewalt DW660k Cutout tool W/Case and kit (Silver Spring) $50

2008-07-14T12:27:45-04:00

Heavy-Duty Cut-Out Tool - DW660
This item is barely used and is in good condition

FEATURES
Tool-free bit change for fast and easy bit changing without a wrench
Turn-on/bump-off switch allows users to easily shut tool off
5 Amp, 30,000 rpm motor provides more cutting power
Slim body design for less fatigue over prolonged use
Dust-sealed switch provides durability and long switch life
Jampot construction provides jobsite durability

SPECIFICATIONS
Amps 5.0 Amps
No Load Speed 30,000 rpm
Collet Diameter 1/8, 1/4 "
Adjustable Guide Yes
Spindle Lock Yes
Tool Length 10" "
Tool Weight 3.2 lbs
Shipping Weight 3.5 lbs

Snap-On Mig Welder (Leesburg) $699

2008-07-14T11:35:03-04:00

Snap-On MIG125 Welder is a gas/gasless wire welder. This wire welder is used but looks like it is new. It is a 120V 60Hz. Instruction pamplet comes with it.

Please fill free to e-mail me with any questions you might have.

Chalk Hog chalk line (washington) $30

2008-07-14T11:25:07-04:00

CH Hanson Chalk Hog
Marks Longer
Snaps cleaner and sharper
Uses less chalk
6x's faster retrieve
Built-in pencil sharpener
Easy fill - No mess
High density poly braided cord
CALL INDUSTRIAL LADDER 301-490-0281
http://www.industrialladder.com/

WOOD SCAFFOLD PLANK (WASHINGTON) $22

2008-07-14T11:08:46-04:00

DI 65 Scaffold Grade Lumber
Rodded clipped and branded
Smooth finish. Available in three lengths.
8' 12' 16'
CALL INDUSTRIAL LADDER 301-490-0281
http://www.industrialladder.com/

ADRIAN VAN SHELVING (WASHINGTON) $232

2008-07-14T10:46:22-04:00

Adrian Steel Company #4442 42" Welded Shelf
FOR MORE INFO AND INSTALLATION ? PLEASE CALL 301-490-0281
WE THE FULL LINE OF ADRAIN STEEL AND WEATHERGUARD PRODUCTS AND INSTALL AT A VERY GOOD PRICE.

Rotovac Powerwand (ashburn) $2300

2008-07-14T10:00:14-04:00

I'm selling the Rotovac Powerwabd Starter Kit, it comes with supplies for approx 6 months. Its a great machine, easy to use in like new condition, I have the cd that will show you how to use it. $2300 OBO Call Joshua 703-929-3164

DRY WALL CART (WASHINGTON) $220

2008-07-14T09:53:00-04:00

* Economical back tube frame suitable for most applications
* Our BIL-JAX drywall carts can handle up to 2500 pounds
* Comes complete with 4-8" hard rubber casters 2-swivel 2-rigid
* 46-1/2" high
* 40-1/2" long
* 44" x 12" tray
CALL INDUSTRIAL LADDER 301-490-0281.
http://www.industrialladder.com/

bcr 6 6" casters KNAACK BOX DELTA GANG BOX (washington) $45

2008-07-14T09:47:51-04:00

Our best selling gang box caster.
6" Caster Set Without Brakes
Maximum load rating 1360 lbs.
Use with Models 32 36 42 60 4824 4830 2472 69 79 89 90 91 2032 2048 2060.
Includes 2 rigid casters and 2 swivel casters
CALL INDUSTRIAL LADDER 301-490-0281
http://www.industrialladder.com/

ATTIC DECK FLOORING (WASHINGTON)

2008-07-14T09:47:00-04:00

Attic Dek is the only storage system designed specifically for unfinished attic space. Manufactured in two sizes to fit either 16" or 24" standard truss spacing, these lightweight interlocking panels are secured to the attic floor joists using five 2" flathead screws. Testing has shown that each panel supports up to 250 pounds, providing consumers a safer attic storage system that is both sturdy and durable.
CALL INDUSTRIAL LADDER 301-490-0281

Honda Harmony EN2500 Generator (Greenbelt, Md) $350

2008-07-13T22:11:22-04:00

Honda harmony model en2500 generator, gas powered with honda motor with low oil alert, level goes low motor turns off. 2500 watts.
301 526 9057

portable/car air compressor (Silver Spring) $10

2008-07-13T20:26:42-04:00

BON-AIRE max power 200psi portable air compressor, operates on 12 volts/DC from car or truck, can be used to inflate tires (car, truck, bike), sports balls, air mattresses, pool toys.

12 ft jumper cables 8 gauge (Silver Spring) $5

2008-07-13T20:11:52-04:00

12 ft jumper cables, 8 gauge, never used

Ramset RS22 single shot powder actuated fastener (calvert county md) $40

2008-07-13T15:46:30-04:00

Designed or frequent use providing professional fastening results in a variety of concrete, masonry or steel applications.
Powder load automatically ejects after each use.
Heavy-duty all-steel construction.

--------------------------------------------------------------------------------
THREADED SHANK LENGTH MOST COMMON
STUD # INCHES MM APPLICATION
| 1524SDP (washered) 3 76.2 2" x 4" to concrete
| 1516SDC (washered) 2-1/2 63.5 2" x 4" to concrete
| 1506 3/4 19.1 Drywall track to concrete

| Uses standard .22 caliber single shot powder loads 2 (Brown), 3 (Green), 4 (Yellow)
| Weight: 4.1 pounds
| Length: 14-3/4"
| Muzzle Bushing O.D.: 3/4"
| Maximum Pin Length: 3"

contact Bob at 301-855-6455

Delta shopmaster 10" table saw with adjustable work support bench (calvert county md) $75

2008-07-13T15:29:03-04:00

i have a 10" table saw with adjustable saw height. cuts 3-inches at 90 degrees, 2-1/2-inches at 45 degrees. Heavy-duty 13 amp motor; self-aligning rip fence aligns parallel to blade; T-slots for miter gauge. Magnesium table.
Table size: 17-1/2 by 26- inches; 52 pounds. also comes with adjustable work support stand with folding legs and carry handle. saw has long extension cord plug for work site use. contact bob at 301-855-6455

Ryobi 10" portable table saw with folding legs with wheels (calvert county md) $150

2008-07-13T15:27:55-04:00

i have a 10" portable table saw with folding legs and wheels. new blade. Model: BTS20R
Extending table allows for a large, 27 In. rip capacity
Outfeed support table to assist when cutting long material
Folding leg stand with wheels for easy transport
Onboard storage for rip fence and mitre gauge
Separate blade height and bevel handles
cost: $269.00 from home depot. asking $150
contact Bob at 301-855-6455. thanks

Generator Parts Machine (Powermate 6250) (nw dc) $10

2008-07-13T15:08:10-04:00

Threw a rod. The generator end has already gone (see pic).

Still got a good frame, gas tank, carb, exhaust, starter rope mechanism etc.
Apologies for the apparent confusion in the pricing line. Please read:
$10 and up for EACH part. OR MAKE ME AN OFFER FOR THE WHOLE THING!

Heavy-duty Stainless Steel Work Table/welders table $175 (20012) $175

2008-07-13T14:49:22-04:00

Adjustable screw leveler feet.
Size is 27" X 32" and is bolted together. Asking $175 obo

Vintage Tool stand---Heavy Duty $85 (NW DC) $85

2008-07-13T14:47:11-04:00

A classic tool stand in excellent condition. Original paint.

Asking $85

craftsman 1hp 4gal. twin tank oil lubricated air compressor (calvert county md) $100

2008-07-13T14:46:51-04:00

i have a craftsman air compressor model no. 16638. twin tank oil lubricated single cylinder compressor with hose. new from craftsman for 169.99. askind 100. contact Bob at 301-855-6455. thanks

8" grinder by Ohio Forge (on stand) (20012) $40

2008-07-13T14:41:24-04:00

2 different grade stone wheels, fine and coarse. One side of spindle is slightly off (spindle that side is out of true), but tool still performs well and has worked great for me for several yrs.

In NW DC in zip 20012.

cell: 202-615-7410

Plug Fuses (WDC 20002) $5

2008-07-13T10:33:09-04:00

2 boxes of 9 time delay plug fuses for sale. 30A-125V AC 30A-125V CA

DeWalt 12V Cordless Drill Set W/ 2 Bit Sets (Capitol Hill SE) $100

2008-07-13T09:45:49-04:00

DeWalt cordless drill set. Drill, 2 batteries, charger, and 2 bit sets. Mint condition. Almost never used.

Refrigerant Leak Detector (Waldorf Md) $150

2008-07-12T20:30:45-04:00

I have a Refrigerant leak detector for sale.It was bought from Aireco Supply and has all paperwork.It comes with all acc. shown in picture and was used about 10 times before i got out of the HVACR trade.Also have many different tools for the HVACR trade as well as many hand tools...Just let me know what you need and I will email you back with a list...Paid 400.00 for the leak detector will sell for 150.00 OBO...Thanks

TABLE SAW: 10" Sears Craftsman Table Saw. Link to youtube Video (NW DC, Tenleytown) $100

2008-07-12T19:33:45-04:00

This is a 10 inch Craftsman table saw. It works well. See the youtube video:

www.youtube.com/v/j2gGFbCcdKQ

Buyer to pickup. $100.00 obo cash only please. Email with questions or to see it.

scaffolding (capitol hill / navy yard) $500

2008-07-12T18:50:41-04:00

complete steel scaffolding system. five plus tiers. aluminum cat walk. four locking casters. most pieces have rust but everything is solid and very usable.
pick up only.

TWO 25ft Retractable cord reels w/metal shop lites. $40 each (NW DC) $40

2008-07-12T11:30:46-04:00

Brand new--unused--NIB!

I bought these for my double garage that never got built.

Bright yellow. Brand new in the box. $40 each
Call for faster response: 202-615-7410

Delta 8" Benchtop Drill Press 11-950 Excellent Condition!!! (District Of Columbia) $85

2008-07-12T11:16:01-04:00

This delta drill press is in excelllent condition with height adjustment, variable speed from 620-3100rpm, 1/2" chuck, chuck key, 1/4 HP, both way miter/bevel adjustment and a smooth and quiet operation.

http://www.tool-village.com (Cut And Paste into Browser)

Heavy Duty 1 1/4 Gallon Tumbler, Like New (Arlington) $350

2008-07-12T10:51:25-04:00

Heavy Duty 1 1/4 Gallon Tumbler
In like new condition. Only used 3 or 4 times!

1/3 Horsepower
115 Volts
6.8 AMPS
Single-phase motor

Has large rubber lined barrel that you can use steel shot in or other media.
Comes with auxiliary switch for a timer and a fan.

New, sells for $480. 00 (without the auxiliary switch)
Asking $350.00

* electric drill w/100+ drill bits * (Washington, DC) $375

2008-07-12T10:36:20-04:00

This electric drill , which works perfectly, comes with a wood carrying case and at least 100 drill bits and other accessories. It's a fantastic, working tool. $375/BRO. Email or 202 320 1988/leave message w/ph #.

CH Extreme contractor series air compressor (silver spring) $85

2008-07-12T09:32:14-04:00

a few years old but only used for a couple months. has run nail guns, a roofing stapler and sprayed textured ceilings and walls. comes with 50' of hose seen in the picture. tanks were emptied after every use to remove any condesation. Many years left in this thing.

Bandsaw - 9" Two Wheel (Capitol Hill) $70

2008-07-12T09:10:50-04:00

Used for one project cutting oak floor tiles while laying parquet floor.

Will remove saw from original box for your inspection.
The item is in "as new" condition. Original manual included.
Original box available for packing.
Please pick up here on Capitol Hill. Cash only. No checks.
We live on Capitol Hill (5 blocks from Eastern Market station)
Thank you
pic 642,644,645,646

Power Tools and Wet/Dry Shop Vacuum (Columbia Heights) $75

2008-07-12T04:42:41-04:00

A dust buster, 2 hand sanders, one two-speed saber saw, one hedge clipper, and one power shop vacuum.

Please contact Patty at 301 919 8652

2007 Clarke 28in autoscrubber rider model (New England) $8750

2008-07-12T02:17:17-04:00

I bought this machine just over a year ago. It has 34 hours on it and is is a 9 on a 10 scale. It has approx 5 hours of run time before needing a charge, has 30 gallons of waste and 14 gallons of cleaning solution capacity. It is ready to start making you money today and needs nothing, if you are interested in this machine or any of Clarke boost autoscrubbing technology email or call me at 603 498 7090

Heavy-duty steel workbench (Glover Park, DC) $50

2008-07-11T19:14:14-04:00

All steel workbench for sale. It is disassembled for transport. The top alone weights about 50 pounds, and the whole thing is probably over 100. Most of the hardware is included, but it just goes together with regular bolts in case you need more. Legs may be bolted to the floor. Most of it all adjusts so you can move the legs, the shelf, etc. It is all made out of heavy gauge steel. These sell for about $250 + $75 shipping on Ebay.

Measurements: 60x34 inches (the top's dimensions), height is about 35 inches.

I can help you get it into your car if need be. Please email and suggest a preferred p/u time for you. Glover Park is near the National Cathedral and Naval Observatory. I will delete this post once I have arranged someone for pickup. keywords: workbench edsal lyon little giant

Matco triple bank top and bottom box 2 years old (crownsville) $4500

2008-07-11T18:39:46-04:00

I have a 2 year old matco triple bank top and bottom tool chest with matching black matco locking top roll cart the box is in like new condition . The box also comes with matco cover , and everything that came in it when i Purchased it new 2 years ago ( drawer liners, 2 new unopend bottles touchup paint, grease , paperwork and more) I paid 11000.00 so this as a sweet deal . Dont want to work on cars anymore my loss is your gain 443 458 8464 Armando

Snap-on cooling system tester (petworth/brightwood) $100

2008-07-11T17:49:46-04:00

Model SVTS262A complete kit with pump, gauge and adapters to fit most domestic and imported automotive cooling systems. bought new 1 year ago for $160. I am no longer in the automotive industry and no longer have a use for it. call me at 703-595-0137

Blue Point digital photographic tachometer (petworth/brightwood) $275

2008-07-11T17:47:44-04:00

Model MT139A complete kit with everything you need to measure ft/min and m/min using the contact wheel or RPM using either the contact cones or a photographic (eye) and a piece of photographic tape placed on the object to be measured. complete and in good working condition. I no longer have a use for it as i no longer work on engines. please call me if interested @ 703-595-0137

Rotovac Machine (ashburn) $2000

2008-07-11T16:22:20-04:00

I am selling a rotovac for $2000 OBO with all cleaning supplies/materials that should last for about 4 months of consistent use.
Great deal on this machinery!!Call me at 571-233-6416

air compressor (Strasburg) $200

2008-07-11T13:25:10-04:00

large titan industrial air compressor, gas 5.5 horsepower engine with dual tanks on a wheel. used very little. works great.

Push Reel Mower (NW DC) $35

2008-07-11T09:34:51-04:00

Great States Push Reel Mower. Sells at Home Depot for $80-$100, asking $35. 7045 Western, Ave NW, DC 20015. About 6 stop signs from Chevy Chase Circle (Western/Connecticut)Cash only.First person who comes gets it. Call Helen 202 248 8074. Due to time constraints I am not able to answer emails.