New Masport Contractor Mower - $1,000

New Masport Contractor Mower 1 thumbnail

condition: new

make / manufacturer: Masport New Zealand

delivery available

QR Code Link to This Post

this mower is solid. All steel construction with a commercial grade 3 speed transmission and is powered by a commercial Briggs & Stratton 850 engine. 190cc. 8.5 ft.torque. This mower is designed for commercial use. The heavy duty high arch steel chassis is able to withstand sandblasting and hard impacts and is combined with the high lift blade cutting system resulting in superior cutting, mulching and catching performance. The heavy duty cast alloy wheels with heavy duty wide rubber are extremely tough and are designed to operate under commercial conditions limiting possible down time.
Cut, Catch, Mulch & Rear Discharge
Powered by Briggs & Stratton 190cc OHV Series 850 Professional IC ReadyStart™ 4 Stroke engine
ReadyStart™ - no priming required and easy starting
Cast iron sleeve in cylinder
540mm (21") deep draw heavy duty steel chassis
Steel front bumper and engine guard offer protection to the cutting chassis
Bolt in front axle with steel bearing plates bolted directly to the chassis
GT Agility PRO 3 Speed Commercial transmission - Ground speed 3.74km/h - 6.63km/h(4.2 mph)
Masport high lift System for superior catching due to increased airflow
Large wide diameter professional grade heavy duty cast aluminium Front 200mm (8") and Rear 225mm (9¼") wheels with synthetic rubber tyres and precision 6202 sealed ball bearings
Comfortable and sturdy upturned upper handle with soft grip, large diameter and heavier gauge steel tube
Robust lower handle with additional bracing for extra durability. 3 position handle locking system for different height settings. Large capacity Commercial Dacron Catcher with dust cover
Rear Discharge Chute designed for safe discharge of grass when mowing without a catcher
Zone start for comfortable starting position
Mulching Capable. Variable Speed Self Propelled. Adjustable Wheel Bearings. Zone Start. Rear Discharge Chute.
Specifications: Chassis Material Deep draw heavy duty steel. Cutting Methods Cut, Catch, Mulch, Rear Discharge. Cutting Width540mm (21")Cutting System Masport high lift Blade System. Engine MakeBriggs & Stratton Engine ModelOHV Series 850 Professional ICEngine Capacity190ccPower Rating (Torque)8.5ft/lb or 11.5Nm. Starting SystemReadyStart™. Engine Type4 Stroke. Drive SystemGT Agility PRO 3 Speed CommercialGround Speed1st - 3.74km/h, 2nd - 5.11km/h, 3rd - 6.63km/h(up to 4.2 mph). Catcher TypeDacron catcher with dust cover and hard bottom. Catcher Volume80L . Wheel Type & Size Cast Aluminium Front 200mm (8") and Rear 225mm (9¼"). Wheel Bearing TypePrecision 6202 sealed ball bearings. Upper Handlebar Type Upturned with soft grip. Lower Handlebar Type Reinforced Handlebar Retainer 3 position handle locking Cutting Height Range13mm - 60mm up to 5" Cutting Height Steps 11Cutting Height Adjustment Single Point Weight56.2kg

post id: 7867094984

posted: 2025-07-19 23:07

updated: 2025-10-05 19:15

♥ best of ^[?]

reading

writing

saving

searching

refresh the page.