There was an error loading the page; please try to refresh the page.

We've detected you are using a browser that is missing critical features.

Please visit craigslist from a modern browser.




Custom Built Compact Tracked Loader - $15,000 (Sterling)


condition: like new
make / manufacturer: Custom
model name / number: Track Loader
size / dimensions: 102"x49"x72"

Custom Tracked Skid Steer / Track Loader

Year Built: 2017

Operating/Idling Hours: 20 (estimated - hour meter battery replaced at approximately 18 hours)

Dimensions: 49” wide, 102” long (rear door to front of bucket), 72” tall

Ground Clearance: 6-1/4” minimum

Operating Weight: 2400 lbs

Tip over load: 1450 lbs

Rated Operating Capacity (ROC): 500 lbs (35% of tip over load per ISO 14397-1)

Undercarriage: 10” wide Bobcat MT-55 tracks, bottom rollers, and drive sprockets

Fluid Capacities: 8 gal fuel, 22 gal hydraulic oil

Engine: Briggs and Stratton Vanguard 36 HP gasoline V-twin, heavy duty AGM battery, tooth belt hydraulic pump drive

Hydraulics: Tandem 13 gpm (26gpm total) Parker pumps, Prince high torque drive motors, 1.5” rods for lift and tilt cylinders

Controls: Pressure reliefs set at 2000 psi, mechanically actuated joystick controls, Brand Hydraulics proportional spool valves for drive motors, Prince joystick controls for loader, Prince spring centering auxiliary valve, Prince ADM high torque drive motors on 2:1 chain drive reduction gears to track drive axles

Features: Auxiliary hydraulics with quick disconnects, quick release implement mount, LED headlights, auxiliary cooling fan

Implements: 6 cubic foot heavy duty bucket (49” wide) with reversible smooth / tooth edge, 60” wide plow blade with right/left hydraulic pivot

Description: Runs great, low hours, and nearly new engine, hydraulics, and undercarriage. This machine was built in 2017 from kit parts and custom modifications making it similar weight and capacity to a Bobcat MT-55. The entire machine chassis is powder coated. Includes a 49” wide bucket and a 60” wide blade with hydraulic swing left and right. Both implements are quick change with two pins at the top of the tilt plate. An extra set of weld-on implement attachment points is included, as well as about 7 gallons of extra hydraulic oil. Fresh oil change on engine after engine break-in.

Will consider offers, a trade, or partial trades plus cash (CNC milling, motorcycles, hovercraft, etc. of similar value). Email for phone number or to see the machine.
  • do NOT contact me with unsolicited services or offers

post id: 7486314509



best of [?]